InfraRED module for CPA 4.0 clock
InfraRED module with CPA 4.0 clock remote control application. The CPA 4.0 astronomical clock can be programmed using the infraRED module, which is equipped with an infrared receiver.
microBOX 25A power dimmer
microBOX 25A is medium power dimmer, designed to work in lighting network, in which it is possible to reduce power consumption by reducing voltage. Due to its small size and low weight it will fit in almost any lighting cabinet. The device uses the transformer method of lowering voltage and power at the same time, which allows energy savings of up to 40%. With this solution we extend the life of luminaires, ballasts and light sources, as well as lower the additional costs of operation and maintenance of the lighting networks. microBOX does not introduce harmonic distortion and does not adversely affect the work of lighting. The device is equipped with thermal protection: internal temperature sensor that if required switches the device off and indicates exceeding the allowed temperature. On the front panel of the device there is a switch that allows the user to easily select the appropriate voltage or, if necessary, a manual bypass.
Product specifications
- voltage optimization of street lighting network
- available 1- and 3-phase versions
- adjustable power reduction level of 20% or 40%
- possibility to activate or deactivate reduction at any time
- lack of harmonic distortion
- possibility to use in cable networks, overhead lines, for external and internal lighting
- on the front panel of the device there is a switch that allows selection of supply voltage
- automatic and manual bypass of the device in case of power failure or damage
- control by any CPA series astronomical programmer or any timer
- 4 LEDs on the front panel of the device, indicating the status of work
- environmentally friendly device – by limiting power consumption it reduces CO2 emissions
- innovation, reliability, easy operation
- high economic efficiency – reducing costs up to 40%
- supply voltage: 230, 238, 245 V, 50Hz
- reception voltage: 230 V – 180 V
- size (width / height / depth): 165 x 330 x 165 mm
- power range: 25A up to 5.5 kVA for a 1-phase and up to 17 kVA for 3-phase
- outputs current capacity: 25A reduction level: 1st reduction level by 20 %, reduction level 2nd reduction level by 40 %
- operating temperature: -40 °C to +40 °C
- protection degree: IP20
- installation in the lighting cabinet and on the board
- weight: 10.8 kg (for one phase)
Products that may interest you
Active Harmonic Filter
The Active Harmonic Filter is an economically attractive solution for reactive power from 1 kVAr per phase. The filter provides dynamic reactive power compensation and current harmonics filtration – up to the 50th harmonic.
LED MAX compensator
LED compensator and LED MAX compensator are designed in such a way to significantly reduce the losses generated in the LED lighting installation which result from the flow of capacitive reactive power.
SSOU street lighting system cabinet
SSOU is a modern street lighting cabinet. SSOU in one enclosure integrates the measuring and distribution part, the system for central power reduction (power reducer) and the system for control and remote monitoring (CPA).
LED street lighting system cabinet
The LED cabinet combines a comprehensive solution providing professional security and control of modern LED street luminaries in a single housing.
APC- LED 1-10 V autonomous time relay
APC- LED 1-10 V is a microprocessor-based time relay designed to control the power of a single LED street lighting luminaire.
Previous
Next