DALItest lamp operation tester
The DALItest tester servers to verify proper operation of lamps adjusted to be controlled via the DALI interface. The user may choose from two testing methods. The first – automatic. In this mode, the lamp’s power at the test’s initial stage is smoothly adjusted from a minor value to the maximum value. At the next stage, a lamp is turn on and off several times. The entire test takes 10 seconds. The other mode is a non-automatic manual mode, which comprises manual, five-step lamp power adjustment with buttons.
Product specifications
- supply voltage: 230 V +5/-10%, 50Hz
- power supply voltage: 9V (ER9V with 1200 mAh capacity)
- tester dimensions (l / w / h): 142 x 69 x 25 mm
- operating temperature: from -40°C to + 70°C
- degree of protection: IP20
Declaration of Conformity - file available when you log in
Operating Manual - file available when you log in
Products that may interest you
Soft start LED inrush current limiter
Soft start LED is an inrush current limiter. It protects the lighting installation against considerable current surge which may cause substantial damage.
PSR autonomous mode switch
PSR autonomous mode switch as an emergency street lighting control. In the event of the clock failure, it may take over its tasks, thus allowing service engineers to identify, diagnose and remove the defect.
DZN voltage drop detector
The voltage drop detector is used to detect and signal a voltage drop at one of the four inputs. The device does not distinguish between phases.
PZS-5 remote control relays
PZS is remote street lighting network control relay in the cascade set.
SSOU street lighting system cabinet
SSOU is a modern street lighting cabinet. SSOU in one enclosure integrates the measuring and distribution part, the system for central power reduction (power reducer) and the system for control and remote monitoring (CPA).
InfraRED module for CPA 4.0 clock
InfraRED module with CPA 4.0 clock remote control application. The CPA 4.0 astronomical clock can be programmed using the infraRED module, which is equipped with an infrared receiver.