InfraRED module for CPA 4.0 clock
InfraRED module with CPA 4.0 clock remote control application. The CPA 4.0 astronomical clock can be programmed using the infraRED module, which is equipped with an infrared receiver.
PSR autonomous mode switch
PSR autonomous mode switch as an emergency street lighting control. In the event of the clock failure, it may take over its tasks, thus allowing service engineers to identify, diagnose and remove the defect.
The system may be mounted in any control cabinet. Its major advantage is a possibility of connecting two sensors at a time, which increases failure-free operation of the device. If one sensor is defective or in the event of an act of vandalism resulting in the damage to the sensor (e.g. removed or covered as a result of painting), the second sensor takes over all functions and controls the device independently.
The device detects if measuring elements have been connected and if they work properly. In case of any irregularities or lack of connection of light-sensitive elements, a relevant LED light in the front panel will activate. If light-sensitive elements have not been connected, ST control output in FOTO mode is inactive. The device has regular boundary values of lighting activation (15 lx) and deactivation (25 lx). Two information outputs Q1 and Q2 inform about switch knob location and defective operation of sensors or their absence.
Product specifications
- emergency lighting control
- analogue light intensity measurement
- optical and sound signaling of work status
- possible to connect two sensors at a time
- possible to mount in any control cabinet
- supply voltage: 230 VAC +10/-15%, 50Hz
- dimensions (W/H/D): 68 x 90 x 65 mm
- device width: 4 modules
- number of control outputs: 1
- number of information outputs: 2
- measurement range: 1- 500 lx
- output current-carrying capacity: 3 A/230V
- ambient temperature: -40°C to +85°C
- protection class: PSR – IP20, sensor – IP67
Declaration of Conformity - file available when you log in
Operating Manual - file available when you log in
Products that may interest you
Active Harmonic Filter
The Active Harmonic Filter is an economically attractive solution for reactive power from 1 kVAr per phase. The filter provides dynamic reactive power compensation and current harmonics filtration – up to the 50th harmonic.
LED MAX compensator
LED compensator and LED MAX compensator are designed in such a way to significantly reduce the losses generated in the LED lighting installation which result from the flow of capacitive reactive power.
SSOU street lighting system cabinet
SSOU is a modern street lighting cabinet. SSOU in one enclosure integrates the measuring and distribution part, the system for central power reduction (power reducer) and the system for control and remote monitoring (CPA).
LED street lighting system cabinet
The LED cabinet combines a comprehensive solution providing professional security and control of modern LED street luminaries in a single housing.
APC- LED 1-10 V autonomous time relay
APC- LED 1-10 V is a microprocessor-based time relay designed to control the power of a single LED street lighting luminaire.
Previous
Next