InfraRED module for CPA 4.0 clock
InfraRED module with CPA 4.0 clock remote control application. The CPA 4.0 astronomical clock can be programmed using the infraRED module, which is equipped with an infrared receiver.
CPAnet control and monitoring system
CPAnet is a modern system that is used for remote monitoring and management of street lighting through the website.
We refer to this system as intelligent as it is able to select the most appropriate moment and time to switch on/off the lights and adjust the light intensity. This considerably reduces power consumption. The system consists of controllers and software. System controllers switch on the lighting system by contactors also allowing control of power reducers operation. Built-in GPS receiver allows to pinpoint the geographical location of the lighting system, therefore to precisely specify the moment of sunrise and sunset.
Time downloaded from the GPS frees the user from having to correct the clock in the driver. The device is mounted in the lighting cabinet. Along with the connected lighting circuits it creates a system that can be remotely monitored by the user.
Product specifications
- full control and management through a website
- GPS time synchronization (time and geographical location downloaded from the GPS enable accurate calculation of sunrise and sunset on a given day and location)
- communication: GPRS, SMS
- automatic location of the controllers on the website map
- easy creation and management of groups of drivers
- possibility to emergency switch the lighting on/off via SMS (mobile phone or web pages)
- real-time monitoring and analysis of network parameters: current, voltage, power consumption, active power, reactive power
- archiving and visualization of measurement and alarm data
- reporting system
- user authentication (login, password) and giving them different powers
- remote software updates and settings on GPRS
- access to free software on the website
- application for mobile devices
- emergency power supply from a built-in battery
- LEDs on the front panel, indicating the status of inputs and outputs, GSM signal, GPRS, GPS, network coverage, battery charging status
- 6 output modes: astronomical, daily, cascade, service, reduction, weather
- possibility of introducing 10 exceptions to the illumination work schedule (e.g. public holidays, local holidays, etc.)
- ability to set separate patches for summer and winter
- immediate information on the occurrence of alarm situations, i.e. power failure, failure of individual phases, power excess/reduction, cabinet openings
- remote lightning power switch on/off during maintenance
- possibility to remotely program lighting with APC-2 and APC-LED systems
- possibility to turn on/off lighting via SMS (e.g. sports fields)
- possibility to customize road lighting to the current volume of traffic (based on data from an external traffic control system)
- system designed for use both in new and existing lighting systems
- temporary lack of access to the Internet does not interfere with operation of the controller
- virtual photocells can be connected, allowing an immediate response to severe weather changes. Its proper use allows achieving substantial savings.
- supply voltage: 85-264 VAC, 47-440 Hz
- driver size (width / height / depth): 150 x 85 x 110 mm
- width of the device: 9 modules
- number of outputs: 8 (4 circuit, 4 switch)
- outputs current capacity: AC1: 6A/250 V AC; DC1: 6A/24 V DC
- number of intputs: 8
- operating temperature: from -30°C to +85°C
- protection degree: IP20
- DIN rail mounting
- cooperation: with a network analyzer/meter
Declaration of Conformity - file available when you log in
Operating Manual - file available when you log in
Products that may interest you
Active Harmonic Filter
The Active Harmonic Filter is an economically attractive solution for reactive power from 1 kVAr per phase. The filter provides dynamic reactive power compensation and current harmonics filtration – up to the 50th harmonic.
LED MAX compensator
LED compensator and LED MAX compensator are designed in such a way to significantly reduce the losses generated in the LED lighting installation which result from the flow of capacitive reactive power.
SSOU street lighting system cabinet
SSOU is a modern street lighting cabinet. SSOU in one enclosure integrates the measuring and distribution part, the system for central power reduction (power reducer) and the system for control and remote monitoring (CPA).
LED street lighting system cabinet
The LED cabinet combines a comprehensive solution providing professional security and control of modern LED street luminaries in a single housing.
APC- LED 1-10 V autonomous time relay
APC- LED 1-10 V is a microprocessor-based time relay designed to control the power of a single LED street lighting luminaire.
Previous
Next