InfraRED module for CPA 4.0 clock
InfraRED module with CPA 4.0 clock remote control application. The CPA 4.0 astronomical clock can be programmed using the infraRED module, which is equipped with an infrared receiver.
microBLUE 3m astronomical digital clock
microBLUE 3m street lighting controllers are used for remote street lighting control via smartphone or tablet from the application.
The device calculates the hours of sunrise and sunset according to the current date and the geographical location in which it is installed or it retrieves them from the table. Functions of the controller and its programming can be done from your smartphone or tablet through Bluetooth wireless connection. It is easier thanks to a simple, free application with a friendly interface. Owing to this, communication with the controller mounted in a lighting cabinet is done remotely, without opening it.
microBLUE 3m at the Światło Fair in Warsaw, was awarded the GOLD VOLT by Polish Chamber of Commerce of Electrical Engineering.
Product specifications
- full control and street lighting control via smartphone or tablet from the application mBLUE
- free application with a simple and intuitive interface
- time synchronization according to the GPS of a smartphone or tablet
- communication via Bluetooth 2.0
- locked access to the controller using a PIN code
- automatic change of summer/winter time
- event recorder
- the ability to program up to three night breaks or four starts at fixed hours
- LEDs on the front panel indicating the status of inputs and outputs, wireless connection status with a smartphone or tablet, power status
- automatic location of drivers on the map of the application
- cooperation with twilight switch
- lighting operating time counter (separate for each of the control outputs)
- the ability to remotely exchange software and settings
- the ability of remote programming of lighting fixtures with APC-LED system
- supply voltage: 230 V +5/-10%, 50Hz
- driver size (width / height / depth): 52 x 104 x 62 mm
- width of the device: 3 modules
- number of outputs:2 (two independent programmable outputs)
- outputs current capacity: AC1: 6A/250 V AC; DC1: 6A/24 V DC
- number of intputs: 1 (twilight switch or event recorder)
- operating temperature: from -30°C to +80°C
- protection degree: IP20
- DIN rail mounting
Operating Manual - file available when you log in
Declaration of Conformity - file available when you log in
Products that may interest you
Active Harmonic Filter
The Active Harmonic Filter is an economically attractive solution for reactive power from 1 kVAr per phase. The filter provides dynamic reactive power compensation and current harmonics filtration – up to the 50th harmonic.
LED MAX compensator
LED compensator and LED MAX compensator are designed in such a way to significantly reduce the losses generated in the LED lighting installation which result from the flow of capacitive reactive power.
SSOU street lighting system cabinet
SSOU is a modern street lighting cabinet. SSOU in one enclosure integrates the measuring and distribution part, the system for central power reduction (power reducer) and the system for control and remote monitoring (CPA).
LED street lighting system cabinet
The LED cabinet combines a comprehensive solution providing professional security and control of modern LED street luminaries in a single housing.
APC- LED 1-10 V autonomous time relay
APC- LED 1-10 V is a microprocessor-based time relay designed to control the power of a single LED street lighting luminaire.
Previous
Next