InfraRED module for CPA 4.0 clock
InfraRED module with CPA 4.0 clock remote control application. The CPA 4.0 astronomical clock can be programmed using the infraRED module, which is equipped with an infrared receiver.
microBOX 12A power dimmer
microBox 12A is a low-power dimmer designed to work in lighting networks, in which it is possible to reduce power consumption by reducing the voltage. microBOX 12A regulator is the smallest reducer on the market. Thanks to small dimensions and low weight it will fit in almost any lighting cabinet. The device uses the transformer method of lowering voltage and at the same time power, allowing up to 40 percent energy savings. microBOX 12A does not introduce harmonic distortion and does not adversely affect the work of lighting. microBOX 12A is used where it is possible to reduce illumination intensity at certain times e.g.: on the streets, stadiums, railway stations and parks.
Product specifications
- voltage optimization of street lighting network
- available 1- and 3-phase versions
- adjustable power reduction level of 20% or 40%
- possibility to activate or deactivate reduction at any time
- lack of harmonic distortion
- automatic bypass of the device in case of power failure or damage
- control by any CPA series astronomical programmer or any timer
- possibility to choose voltage on the terminal block
- 3 LEDs on the front panel of the device, indicating the status of work
- possibility to use in cable networks, overhead lines, for external and internal lighting
- environmentally friendly device – by reducing power consumption it reduces CO2 emissions
- innovation, reliability, easy operation
- high economic efficiency – reducing costs up to 40%
- supply voltage: 230, 238, 240 V, 50Hz
- output voltage: 230 V – 180 V
- size (width / height / depth): 140 x 215 x 125 mm
- capacity range up to: 2.5 kVA for a 1-phase and up to 7.5 kVA for 3-phase
- outputs current capacity: 12 A
- reduction level: 1st reduction level by 20%, 2nd reduction level by 40%
- operating temperature: from -40°C to +40 °C
- protection degree: IP20
- installation in the lighting cabinet and on the board
- weight: 4.7 kg (for one phase)
Products that may interest you
Active Harmonic Filter
The Active Harmonic Filter is an economically attractive solution for reactive power from 1 kVAr per phase. The filter provides dynamic reactive power compensation and current harmonics filtration – up to the 50th harmonic.
LED MAX compensator
LED compensator and LED MAX compensator are designed in such a way to significantly reduce the losses generated in the LED lighting installation which result from the flow of capacitive reactive power.
SSOU street lighting system cabinet
SSOU is a modern street lighting cabinet. SSOU in one enclosure integrates the measuring and distribution part, the system for central power reduction (power reducer) and the system for control and remote monitoring (CPA).
LED street lighting system cabinet
The LED cabinet combines a comprehensive solution providing professional security and control of modern LED street luminaries in a single housing.
APC- LED 1-10 V autonomous time relay
APC- LED 1-10 V is a microprocessor-based time relay designed to control the power of a single LED street lighting luminaire.
Previous
Next