Home » Offer » Street lighting controllers » microBLUE 3m astronomical digital clock

microBLUE 3m astronomical digital clock

microBLUE 3m street lighting controllers are used for remote street lighting control via smartphone or tablet from the application.

The device calculates the hours of sunrise and sunset according to the current date and the geographical location in which it is installed or it retrieves them from the table. Functions of the controller and its programming can be done from your smartphone or tablet through Bluetooth wireless connection. It is easier thanks to a simple, free application with a friendly interface. Owing to this, communication with the controller mounted in a lighting cabinet is done remotely, without opening it.

microBLUE 3m at the Światło Fair in Warsaw, was awarded the GOLD VOLT by Polish Chamber of Commerce of Electrical Engineering.

Product specifications

full control and street lighting control via smartphone or tablet from the application mBLUE
free application with a simple and intuitive interface
time synchronization according to the GPS of a smartphone or tablet
communication via Bluetooth 2.0
locked access to the controller using a PIN code
automatic change of summer/winter time
event recorder
the ability to program up to three night breaks or four starts at fixed hours
LEDs on the front panel indicating the status of inputs and outputs, wireless connection status with a smartphone or tablet, power status
automatic location of drivers on the map of the application
cooperation with twilight switch
lighting operating time counter (separate for each of the control outputs)
the ability to remotely exchange software and settings
the ability of remote programming of lighting fixtures with APC-LED system

supply voltage: 230 V +5/-10%, 50Hz
driver size (width / height / depth): 52 x 104 x 62 mm
width of the device: 3 modules
number of outputs:2 (two independent programmable outputs)
outputs current capacity: AC1: 6A/250 V AC; DC1: 6A/24 V DC
number of intputs: 1 (twilight switch or event recorder)
operating temperature: from -30°C to +80°C
protection degree: IP20
DIN rail mounting

Operating Manual - file available when you log in

Declaration of Conformity - file available when you log in

Products that may interest you

digiLUX digital twilight switch

digiLUX digital twilight switch is designed to control lighting: street, manufacturing facilities and industrial halls. It is an autonomous device or operating as supplementation of digital astronomical CPA programmers.

Active Harmonic Filter

The Active Harmonic Filter is an economically attractive solution for reactive power from 1 kVAr per phase. The filter provides dynamic reactive power compensation and current harmonics filtration – up to the 50th harmonic.

PSR autonomous mode switch

PSR autonomous mode switch as an emergency street lighting control. In the event of the clock failure, it may take over its tasks, thus allowing service engineers to identify, diagnose and remove the defect.

CPA 4.0 astronomical digital clock

CPA 4.0 is a controller designed for switching on and off the street lighting. Hours of switching on and off are determined on the basis of data from an array of sunrises and sunsets, and amendments made by the user.

midiBLUE NFC astronomical digital clock

The midiBLUE NFC controller is used to switch lighting on, off and monitor it remotely via a web page or by a proximity via a smartphone from the midiBLUE NFC application.