DZN voltage drop detector
The voltage drop detector is used to detect and signal a voltage drop at one of the four inputs. The device does not distinguish between phases.
Product specifications
- detection and signaling of voltage absence at one of four inputs
- operation mode without an analysis of voltage input (factory set)
- operation mode with an analysis of voltage input
- optical signaling of operation mode
- no phase distinction
- cooperation with CPAnet and midiBLUE street lighting systems
- possible cooperation with other devices
- possible installation in every lighting cabinet
- power supply voltage: 230VAC, ±10%, 50Hz,
- dimensions (w/h/l): 53 x 96 x 33 mm
- device width: 3 modules
- number of outputs: 1P
- relay output current-carrying capacity: AC1: 5A/230V, DC1: 5A/24V
- number of inputs: 4 (galvanic separation)
- power consumption: 1W
- operating temperature: from -20°C to +70°C
- voltage on inputs L1 – L4: 400VAC,
- degree of protection: IP20
- installation on the DIN bar
Declaration of Conformity - file available when you log in
Operating Manual - file available when you log in
Products that may interest you
APC-LED ZHAGA autonomous time relay designed to control the power of a single LED street lighting fixture.
APC-LED ZHAGA autonomous time relay designed to control the power of a single LED street lighting fixture.
CPA 4.0 astronomical digital clock
CPA 4.0 is a controller designed for switching on and off the street lighting. Hours of switching on and off are determined on the basis of data from an array of sunrises and sunsets, and amendments made by the user.
midiBLUE astronomical digital clock
midiBLUE is a modern and intelligent street lighting controller. It is designed for turning on/off and monitoring operation of lighting infrastructure. The controller is programmed using a website.
microBOX 25A power dimmer
microBOX 25A is medium power dimmer, designed to work in lighting network, in which it is possible to reduce power consumption by reducing voltage. Due to its small size and low weight it will fit in almost any lighting cabinet.
Soft start LED inrush current limiter
Soft start LED is an inrush current limiter. It protects the lighting installation against considerable current surge which may cause substantial damage.
InfraRED module for CPA 4.0 clock
InfraRED module with CPA 4.0 clock remote control application. The CPA 4.0 astronomical clock can be programmed using the infraRED module, which is equipped with an infrared receiver.