DALItest lamp operation tester
The DALItest tester servers to verify proper operation of lamps adjusted to be controlled via the DALI interface. The user may choose from two testing methods. The first – automatic. In this mode, the lamp’s power at the test’s initial stage is smoothly adjusted from a minor value to the maximum value. At the next stage, a lamp is turn on and off several times. The entire test takes 10 seconds. The other mode is a non-automatic manual mode, which comprises manual, five-step lamp power adjustment with buttons.
Product specifications
- supply voltage: 230 V +5/-10%, 50Hz
- power supply voltage: 9V (ER9V with 1200 mAh capacity)
- tester dimensions (l / w / h): 142 x 69 x 25 mm
- operating temperature: from -40°C to + 70°C
- degree of protection: IP20
Declaration of Conformity - file available when you log in
Operating Manual - file available when you log in
Products that may interest you
microBLUE 3m astronomical digital clock
microBLUE 3m street lighting controllers are used for remote street lighting control via smartphone or tablet from the application.
The device calculates the hours of sunrise and sunset according to the current date and the geographical location in which it is installed or it retrieves them from the table.
Lighting controller for sports facilities
CPA Sport is a controller designed for lighting management in sports facilities. Through the website, you can set passwords and lighting duration, calculate the estimated cost of lighting in a particular month and also specify the time period when the lighting is turned on/off via SMS.
SILENT cabinet led light
SILENT is a LED lamp with the function of a control cabinet end piece, which ensures its optimal illumination.
When the door is opened, the lamp lights up automatically and when the door is closed, the light inside the cabinet goes out automatically.
LED street lighting system cabinet
The LED cabinet combines a comprehensive solution providing professional security and control of modern LED street luminaries in a single housing.
PSR autonomous mode switch
PSR autonomous mode switch as an emergency street lighting control. In the event of the clock failure, it may take over its tasks, thus allowing service engineers to identify, diagnose and remove the defect.
LED compensator
LED compensator and LED MAX compensator are designed in such a way to significantly reduce the losses generated in the LED lighting installation which result from the flow of capacitive reactive power. In practice it means reduction of high bills for capacitive reactive energy,