1-10test LAMP OPERATION TESTER
The 1-10test device servers to verify proper operation of lamps adjusted to be controlled via the 1-10 interface. Testing may be performed in two ways. The first – automatic. In this mode, the lamp’s power is smoothly adjusted from the maximum (10V) to the minimum (~0V) value. Having acquired the minimum power, a lamp returns to its maximum-power state. The entire test takes about 5 seconds. The other, non-automated manual mode comprises manual, 11-step adjustment of the lamp power with buttons located besides an LED meter.
Product specifications
- supply voltage: 230 V +5/-10%, 50Hz
- power supply voltage: 9V (ER9V with 1200 mAh capacity)
- tester dimensions: (l / w / h) 142 x 69 x 25 mm
- operating temperature: from -40°C to + 70°C
- degree of protection: IP20
Declaration of Conformity - file available when you log in
Operating Manual - file available when you log in
Products that may interest you
Soft start LED inrush current limiter
Soft start LED is an inrush current limiter. It protects the lighting installation against considerable current surge which may cause substantial damage.
digiLUX digital twilight switch
digiLUX digital twilight switch is designed to control lighting: street, manufacturing facilities and industrial halls.
It is an autonomous device or operating as supplementation of digital astronomical CPA programmers.
microBOX 12A power dimmer
microBox 12A is a low-power dimmer designed to work in lighting networks, in which it is possible to reduce power consumption by reducing the voltage. microBOX 12A regulator is the smallest reducer on the market. Thanks to small dimensions and low weight it will fit in almost any lighting cabinet.
microBOX 25A power dimmer
microBOX 25A is medium power dimmer, designed to work in lighting network, in which it is possible to reduce power consumption by reducing voltage. Due to its small size and low weight it will fit in almost any lighting cabinet.
microBLUE GPS astronomical digital clock
microBLUE GPS is a modern street lighting controller with built-in GPS receiver. Programming of the controller is carried out by a smartphone from the mBLUE application.
LED compensator
LED compensator and LED MAX compensator are designed in such a way to significantly reduce the losses generated in the LED lighting installation which result from the flow of capacitive reactive power. In practice it means reduction of high bills for capacitive reactive energy,